Standard OEM air recirculation dump valve in plastic for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. Other ref 82468490.

Uprated, adjustable twin piston air recirculating dump valve in machined aluminium for all integrale and Evo models. 

Comes with an additional uprated spring for 1.3 - 3 BAR.

Machined, aluminium, vent to atmosphere, piston dump valve.

Suitable for boost up to 1.3 Bar & a stiffer spring is included for 1.3 - 3 Bar competition cars.

Standard exhaust centre section for all Lancia Delta integrale 8v, 16v models without Kat. As original, hot-dip galvanized steel. Made in Italy by an original equipment supplier.

Exhaust down pipe with flexible section for Lancia Delta integrale 8v, 16v & Evolution 1. As original, hot-dip galvanized steel with braided stainless steel flexible section. Made in Italy by an original equipment supplier.

Twin exit rear exhaust section for Lancia Delta integrale 8v and 16v models. As original, hot-dip galvanized steel. Made in Italy by an original equipment supplier.

Exhaust sealing ring front to centre section and centre to the rear silencer. Fits the standard exhaust on all Delta integrale 8v, 16v, Evo 1 and Evolution 2 models.

Note - the front ring on Cat cars is 82407143.

Rubber exhaust mount for all Lancia Delta integrale 8v & 16v and Evo models. 4 per car.

Limited stock. Readily available as the Powerflex poly bush: Red (similar flexibility as the rubber) or black (harder than the rubber).

Exhaust sealing fire ring from catalyst to centre pipe on Lancia Delta integrale 8v Kat & Evo 2 models.

Genuine Weber 2.5 bar fuel pressure regulator for all Lancia Delta integrale 16v and Evo 16v without catalyst. Housed in silver anodized aluminium. We also stock 3 bar and 0-5 bar regulators.

Exhaust manifold gasket for Lancia Delta integrale 16v, Evolution 1 & Evo 2. Made by the original factory supplier in Italy.

Inlet manifold gasket for integrale 16v, Evo 1 & 2

Exhaust front pipe to turbo elbow gasket for all Lancia Delta integrale and Evolution 8v and 16v models except the Evo 2 16v Cat.

Crank case breather hose to inlet manifold for all 16v models. 

Since this hose is manufactured for us by Samco Sport, there is a lifetime warranty. It is made from high-quality silicone and is fluro lined, unlike hoses sold elsewhere.

Silicone lower induction hose - turbo to intercooler for Lancia Delta integrale 16v, Evo 1 & Evolution 2.

Lancia Delta vacuum hose for all small bore pipes. Suitable replacement for the boost hoses to the map sensors, Pierburg wastegate control valve, vacuum accumulator etc. Sold by the metre. 4 metres is enough to replace all hoses.

Breather hose set for Lancia Delta integrale 16v, Evolution 1 and Evo 2. High quality silicone, fluro lined, made in the UK.

Samco silicone top and bottom intercooler / induction hoses kit for 16v, Evo 1 & Evo 2.

Matte black silicone.

You may also like the hose clamp kit.

Original injector for Lancia Delta integrale 16v, Evolution 1 & Evo 2.

Exhaust manifold lock nut for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Sold individually.

APS 02/03 black map sensor for Lancia Delta integrale 8v, 16v and Evolution 1. Reproduction map sensor from Italy, made to original spec.

Copper turbo-flange locknut for Lancia Delta integrale 8v, 16v, Evo 1 & Evo 2. Sold individually.

Relay for fuel pump and engine ECU for integrale 8v, 16v and Evo 1.

Also headlights, heater fan, horn, cooling fan, rear screen, rear wiper, A/C.

Square plastic body plug for self tapping fixing screws i.e. wheel arch liner fixing screws.

Original Magnet Marelli "Blue" water temperature sensor for Weber Marelli IAW engine management.

Fits Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Exhaust manifold stud for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. 5 per car. Sold individually.

Turbo to exhaust stud for cast manifolds on Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. Sold individually, price is per stud.

Genuine Pierburg wastegate control valve for all Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models.

NO LONGER AVAILABLE - OUR REPLACEMENT IS AVAILABLE HERE