Exhaust manifold stud (long) for Lancia Delta integrale 16v, Evo 1 & Evolution 2. 4 per car. Sold individually, price is per stud. The long stud for the standard cast iron exhaust manifold.

Air Scoop Conveyor for Lancia Delta integrale 16v, Evo and Evo 2.

Weld-in flexible stainless steel exhaust section for the front pipe of all variants including Evo 2.

Copper washer for banjo fittings on fuel filter, oil filter block housing, oil supply pipe to the turbo, power steering pump, and power steering rack. For all models.

Idle control valve for Lancia Delta integrale 8v, 16v, Evo 1 & Evo 2.

NOS Fuel hose with appropriate fittings 16v and 16v Kat only. From fuel filter to fuel rail. No longer available.

O ring seal fuel pump top to fuel tank for 8v and 16v integrale models (not Evo).

Group N motorsport spec 3 bar map sensor for Lancia Delta integrale 16v, Evolution 1. 'Grey'

Accelerator cable for Lancia Delta integrale 16v, Evo 1 & Evolution 2.

Turbo to exhaust manifold gasket for Lancia Delta integrale and Evo.

Stainless steel crush gasket. OEM spec. Suitable for all models.

Plastic nut for breather pipe on top of fuel tank, all models. Re-produced in the UK in the correct material, the same as what was originally fitted in the factory.

Submersible rubber fuel hose for in-tank pipes for integrale 8v, 16v & Evolution, Lancia Fulvia etc. Price per metre.

OEM air filter element for Lancia Delta integrale 8v, 16v, Evolution  and Evo 2. Supplied by a major Italian manufacturer, correct for all models.

It is correct for the Delta integrale since it does not have the restrictive metal mesh which is on filters sold elsewhere.

Intercooler to throttle body hose for all 16v models. Remanufactured in reinforced matt black silicone.

90 degree bend induction hose - 2 per car for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. For connecting the air box to the straight metal pipe and connecting the pipe to the front of the turbocharger. Sold individually. 

OEM fuel filter complete with replacement copper washers. Standard service replacement fuel filter.

Walbro fuel pump kit including collar to replace the original pump in Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. 

We also offer a higher flow rate pump kit.

Intercooler shroud (conveyor), all models.

Very limited availability, please contact us.

Breather hose from crank case breather separator to induction pipe. All 16v models.

Walbro upgraded motorsport fuel pump kit including collar. A direct replacement for the original pump for the Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. 

Fuel pump collar for all Delta applications where the fuel pump is 37mm in diameter (Walbro for example).

Fuel Tank Filler Hose for Lancia Delta integrale and Evo. Made by Samco Sport in the UK. Correct fluro lining for fuels including E10, unlike the hoses sold elsewhere. Lifetime warranty.

You may also need the hose clamps.

Exhaust Centre Pipe from the Cat back. Fits Integrale 8V Cat, Evo 8V Cat and Evo 2. (All Cat-equiped cars). As original, hot-dip galvanized steel. Made in Italy by an original equipment supplier.

Exhaust front pipe for 8V Cat. As original, hot-dip galvanized steel with braided stainless steel flexible section. Made in Italy by an original equipment supplier.

Exhaust manifold washer. For all Lancia Delta models. Standard replacement part.

Sold individually.

Jubilee clips for hose (82452117)

Includes jubilee clips as shown in the picture. The hose is not included

Jubilee clips for (82475251)

Includes two jubilee clips. The hose is not included

Jubilee clips for hose (TCS17)

Includes jubilee clips as shown in the picture. The hose is not included