Replacement pick-up for the Evo 2 (16v Cat) phase sensor.

Magnecor uprated ignition leads for 8v integrale (including 8v Evo). Includes coil lead. Blue 8mm cable.

Replacement ignition amplifier for all models. 1 per coil.

2 needed for Evo 2 fitted to aluminium heat sink. Sold individually.

Wiring loom rubber gaiter kit. For Lancia Delta integrale Evo 2 only. Includes protective gaiters for each plug for every sensor and component in the Evo 2 engine bay.

We also have the gaiter kit for 16v and Evo 1

Replacement rubber gaiters for plugs in the engine bay. This kit is for integrale 16v and Evo 1 only.

We also have the gaiter kit for Evo 2.

Small wiring harness clip for various areas of the engine bay. Approx 15mm internal diameter. Keeps the loom attached to the front scuttle panel, firewall, inner wings and other locations on the vehicle. Sold individually.

The correct uprated iridium spark plug for Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models. Sold individually.

x4 needed.

Replacement rubber seals kit for Lancia Delta integrale, Evo and Evo 2 radiator fan motor assembly.

Bolt for the black plastic cover between the head and the inlet manifold on 16v models. Sold individually.

Evo 2 Ignition coil bolts and washers. In high quality stainless steel. Pack of 8 bolts and washers, one set per car.

Injector connector for all models. Sold individually. Includes pins and seals. Fits integrale 8v, 16v, Evo and Evo 2.

Ignition coil connector plug. For integrale 16v, 8v kat and Evo 1.

2 Pin sensor plug for Lancia Delta integrale and Evo. For the water and air temperature sensors on all models. Includes the water seals and new wiring pins. Fits all models, integrale 8v, 16v, Evo and Evo 2.

Wiring connector for the throttle potentiometer and map sensors. Fits all models, integrale 8v, 16v, Evo and Evo 2.

Wiring connector for Evo 2 ignition coil packs. Sold individually. For Lancia Delta integrale Evo 2 only.

A set of competition HT leads for Delta integrale 16v and Evo 1. Hand made by Magnecor in the UK.

Wastegate over-boost valve. Manufactured by Pierburg. Replaces the no longer available original metal valve. Sold with a wiring adapter for a straightforward plug and play install. Fits Lancia Delta integrale 8v, 8v Kat, 16v, Evoluzione and Evo 2. To replace 7632715.

High tensile 10.9 bolt. Various applications including front wishbone bush to body, alternator bracket, gear selector rod, engine mounts on all Lancia Delta integrale and Evo.

Remanufactured battery tray for Lancia Delta integrale 8v, 16v, Evo and Evolution 2. The clamp and hinge are made from aluminium for extra strength. Each bolt hole is reinforced with metal sleeving.

We have re-manufactured the Delta integrale fuel level sender. It is made from 304 stainless steel and upgraded modern components. A direct plug and play replacement for the original. This fits Lancia Delta integrale 8v, 16v, Evo and Evo 2, all versions. Compatible with modern fuel including E10.

Standard EPROM ECU Chip for Lancia Delta Evo 2 16v Kat. Factory stock tune. Replacement for the factory fitted chip in the ECU. Bring the car back to stock power output with this chip and all stock engine and turbo parts.

Negative battery cable earth lead for Lancia Delta integrale 8v Kat, 16v, Evo 1, Evo 1 8v kat and Evo 2. Made in-house with high-quality components.

Upgraded cable thickness. Standard is 16mm² and this cable is 25mm²

Ignition coil amplifier 7 pin loom connector kit for Lancia Delta integrale and Evo.

A set of black competition HT leads for Delta integrale 16v and Evo 1. Hand made by Magnecor in the UK.

Head cable and breather hose cover for Lancia Delta integrale 16v, Evo (16v) and Evo 2.

Cable Junction Box Cover for Lancia Delta integrale and Evo

Voltage Regulator for Lancia Delta integrale and Evo

Alternator Rectifier for Lancia Delta integrale and Evo