OEM SKF Wheel hub bearing kit for Lancia Delta integrale 8v / 16v (front) or Evolution front & rear. Kit for one wheel.

Cap head (allen) bolt for front and rear inner CV joints, all models. Sold individually, 6 per joint.

Bolts for the clutch to flywheel. Includes lock washers. Original equipment specification high tensile fasteners. For all Lancia Delta integrale and Evo models. Sold as a set of 6.

Metalastic support for rear propshaft for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Lower gear lever bush for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Sold individually, 2 per car.

The lower half of the speedo cable (gearbox end) for Lancia Delta HF 4WD, integrale 8v & 16v.

The upper half of the speedo cable for Lancia Delta HF 4WD, integrale 8v & 16v.

Standard original specification 3 piece clutch by Valeo for integrale 8v Kat, 16v, Evo 1 & Evo 2.

Lancia Delta integrale clutch master cylinder. Standard part, manufactured by the original equipment supplier in Italy. For integrale 16v, Evo 1 and Evo 2. Does not fit the integrale 8v with the cable actuated clutch.

Clutch release bearing for 8v push type clutches.

Inner constant velocity joint for Lancia Delta integrale 8v, 16v, Evo 1, Evolution 2 models. Made by the original factory supplier in Italy. Genuine SKF.

Front outer constant velocity joint for Lancia Delta integrale 8v and 16v without ABS.

Outer constant velocity joint for Lancia Delta integrale 8v and 16v rear without ABS. Also fits HF Turbo (front!)

Rear diff cradle for all models. Protects the rear diff and stiffens the rear end when used in conjunction with the rear lower strut brace - OMPMA1663.

Front diff to transfer box seal O ring

left front driveshaft to front diff seal O ring

- for all models.

Hub drive flange front axle for all 4 stud Lancia Delta integrale 8v & 16v.

The mount for the rear diff to the carrier frame on Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models.

The lower front gearbox mounting to the crossmember bracket for Lancia Delta integrale 8v, 16v, Evolution 1 and Evo 2 models. 

Hub nut for Lancia Delta integrale 8v, 16v, Evo and Evo 2 FRONT, Evo and Evo 2 REAR. OEM supplier.

Transfer box to prop shaft seal for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Gearbox input seal for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Rotary seal fitted inside the tube which bolts to the bell housing (4641195).

Gearbox pinion shaft cover and seal assembly for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

No longer available. The rotary seal is available here.

Front diff to left hand driveshaft rotary seal for Lancia Delta integrale 8v Kat, 16v, Evo 1 & Evolution 2. Previous part numbers: 95720154, 40004220 and 40004430.

Right hand front driveshaft seal for differential/viscous coupling housing for Lancia Delta integrale 8v non-kat. OEM factory supplier, made in Italy.

Spring clip for drive shaft location to CV joints and differential splines for all models.

Clutch cable for Lancia Delta integrale 8v. OEM manufacturer.

Primary (top) shaft front gearbox bearing for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2.

Primary (top) shaft rear gearbox bearing for Delta Evo, will also fit 16v. Number 11 in diagram.