Exhaust manifold stud (long) for Lancia Delta integrale 16v, Evo 1 & Evolution 2. 4 per car. Sold individually, price is per stud. The long stud for the standard cast iron exhaust manifold.

Air Scoop Conveyor for Lancia Delta integrale 16v, Evo and Evo 2.

Weld-in flexible stainless steel exhaust section for the front pipe of all variants including Evo 2.

Copper washer for banjo fittings on fuel filter, oil filter block housing, oil supply pipe to the turbo, power steering pump, and power steering rack. For all models.

Idle control valve for Lancia Delta integrale 8v, 16v, Evo 1 & Evo 2.

NOS Fuel hose with appropriate fittings 16v and 16v Kat only. From fuel filter to fuel rail. No longer available.

OEM locking fuel cap with 2 keys. For Lancia Delta integrale Evo and Evo 2.

Standard exhaust centre section for Lancia Delta Evolution 16v models without Kat. As original, hot-dip galvanized steel. Made in Italy by an original equipment supplier.

Group N motorsport spec 3 bar map sensor for Lancia Delta integrale 16v, Evolution 1. 'Grey'

Relay for fuel pump and engine ecu for Lancia Delta Evo 2 (16v Evo Cat) only. Genuine original part. Very limited availability, please enquire.

Accelerator cable for Lancia Delta integrale 16v, Evo 1 & Evolution 2.

Italian made 2.5 BAR APS or MAP sensor for Evo 2 16v KAT cars.

Turbo to exhaust manifold gasket for Lancia Delta integrale and Evo.

Stainless steel crush gasket. OEM spec. Suitable for all models.

Plastic nut for breather pipe on top of fuel tank, all models. Re-produced in the UK in the correct material, the same as what was originally fitted in the factory.

Submersible rubber fuel hose for in-tank pipes for integrale 8v, 16v & Evolution, Lancia Fulvia etc. Price per metre.

Lambda sensor for Lancia Delta integrale 8v Kat & Evo 2 models.

OEM air filter element for Lancia Delta integrale 8v, 16v, Evolution  and Evo 2. Supplied by a major Italian manufacturer, correct for all models.

It is correct for the Delta integrale since it does not have the restrictive metal mesh which is on filters sold elsewhere.

Intercooler to throttle body hose for all 16v models. Remanufactured in reinforced matt black silicone.

90 degree bend induction hose - 2 per car for Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. For connecting the air box to the straight metal pipe and connecting the pipe to the front of the turbocharger. Sold individually. 

Walbro fuel pump kit including collar to replace the original pump in Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. 

We also offer a higher flow rate pump kit.

Metal gasket for between the turbo elbow and the pre-cat equipped front pipe on all standard Lancia Delta integrale Evo 2s. Very high quality production.

Fuel tank top seal. High quality rubber gasket for sealing the fuel pump housing access threaded hole. It is made out of an improved rubber compound, suitable for modern fuels, including E10. For Lancia Delta integrale Evo 1 and 2 only.

Intercooler shroud (conveyor), all models.

Very limited availability, please contact us.

Breather hose from crank case breather separator to induction pipe. All 16v models.

Walbro upgraded motorsport fuel pump kit including collar. A direct replacement for the original pump for the Lancia Delta integrale 8v, 16v, Evo 1 & Evolution 2. 

Fuel pump collar for all Delta applications where the fuel pump is 37mm in diameter (Walbro for example).

Fuel Tank Filler Hose for Lancia Delta integrale and Evo. Made by Samco Sport in the UK. Correct fluro lining for fuels including E10, unlike the hoses sold elsewhere. Lifetime warranty.

You may also need the hose clamps.

Exhaust front pipe for Evo 2 16v Cat complete with pre-catalyst in down pipe. As original, hot-dip galvanized steel. Made in Italy by an original equipment supplier.